RAS

  • RAS POWERcut2

    The second generation RAS POWERcut2 swing beam shears deliver twist-free, high precision and burr-free cuts with maximum dimensional accuracy. They ensure optimal material utilization and enable an optimum workflow…

  • RAS PRIMEcut

    With its 3 mm capacity and 3100 mm cutting length the RAS PRIMEcut combines all features a critical user expects from modern shearing technology. Innovative swing beam technology offers clean and right-angled cuts.

  • RAS Rounding Machines

    Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min. A counter displays the rear roll…

  • RAS Seam Closing Machine

    Closes seams with widths of 10 mm and 13 mm on round tubes. Changeover from inside to outside seams in seconds. The working length can be doubled, by turning the tube.

  • RAS SMARTcut

    With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all characteristics of a high performance, premium shear. The sheet support and sorting system leads the blanks to the backstop…

  • RAS SpeedySeamer

    The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer is a 9-station high quality system.

  • RAS Swaging

    The motorized or manual driven swaging machines include 9 pair of swaging wheels and a divided large stop plate in the standard configuration. The speed (RAS 11.35) can be adjusted by means of a foot switch.

  • RAS TURBO2plus

    If you want to turn conical profiles that are plugged into each other, you should seek the adjustable stop finger watch for conical bending. Parallel bends as you come to the middle area of the machine, in which the stop finger position…

  • RAS UpDownCenter 2

    The UpDownCenter-2 is a semi-automatic bending center for high precision panels and boxes up to 4060 mm bending length and up to 600 mm box height. With up to 4 mm mild steel bending capacity, it is ideal for thin and medium material thicknesses…

  • RAS VENTIrounder

    The RAS VENTIrounder for the air duct production solves all these problems. It easily rounds sheet metal elbow cheeks with pre-formed Snap Lock or Pittsburgh seams. The result are perfectly rounded inside and outside elbow…

  • RAS XL-Center

    Based on the remarkable XXL-Center technology, RAS introduces a folding innovation for roofing and architectural profiles. With 3200 mm (124 inches) folding length at 1.5 mm mild steel (16-gauge) capacity, the XL-Center…

  • RAS XXL-Center

    Does this sound familiar? Your bread and butter is in long parts, but bending them requires two, maybe three operators. The floor space in your factory is shrinking. On the other hand the effort and cost to handle sometimes…

Title

Go to Top