Deburring & Finishing

Gecam G13 Giant

G13 GIANT ABRASIVE BELT DEBURRING MACHINE

The G13 GIANT DEBURRING MACHINE with abrasive belt for metal surfaces has a useful working width of 1300 mm, allowing for a possibility of three different configurations according to your desired application.

  • Moving heads
  • Indipendent motors for each working group
  • Pneumatic air filter with automatic water-drain system
  • Padlocked main electrical switch
  • Hoods for aspiration placed inside the machine, for each working group.
  • Centralised independent pneumatic control cabinet with IP54 protection
  • Adjustable pressure control and display from machine operator on front side
  • Pneumatic air filter with automatic water-drain system
  • Working pressure adjustment and display, plus “Grit set system”
  • Pneumatic plant working without lubrication
  • Compressed air pressure 6 bar

The G13 GIANT can be equipped with 3 or 4 working units:

AGGREGATE “R”
Abrasive belt with rotation in the same feed of the workpiece

  • N. 1 abrasive belt with in-feed rotation
  • Pneumatic grinding belt oscillation
  • Rubber, spirally grooved contact roller 55 Shore adjustable in height
  • Contact roller diameter mm 125
  • Motor power kW 4,0 with cutting speed at 15 m/sec

AGGREGATE “T”
Rotating and oscillating top brushes cassette

  • N° 1 Top brush cassette(n. 3)
  • Diameter brush 115 mm
  • Brush mixed Scotchbrite and belt
  • Drive motor Kw 3

AGGREGATE “B”
Rotating brush unit in advance feed

  • N° 1 Rotating brush unit
  • Brush diameter: mm 150
  • Brush in scotch brite
  • Motor power 3,0 kW at cutting speed 1900 rpm

AGGREGATE “b”
External brush unit

  • N° 1 Rotating brush unit
  • Brush diameter: mm 150
  • Brush in scotch brite
  • Motor power 3,0 kW at cutting speed 1900 rpm
Smma-logo
+61 (03) 9758 9377 sales@sheetmetalmachinery.com.au