The WUKO Uni Bender is equipped with four roller stops enabling easier handling and better guidance especially on outside radius (qualified use for inner radius).
Starts Where the Others Stop! For bending sheet metal legs from 90° up to 180° (hem), for inner as well as outer radii!
Starts Where the Others Stop! For bending sheet metal legs from 90° up to 180°
Starts Where the Others Stop! For bending sheet metal legs from 90° up to 180° (hem)
The Specialist for Curves! WUKO Mini Benders for bending up to 90° especially on small radii (inner as well as outer radii)
WUKO Mini Benders for bending up to 90° especially on small radii (inner as well outer radii)
The Big Brother! The WUKO Duo Bender was especially designed for quick and easy bending of long, straight sheet metal strips.
The Big Brother! The WUKO Duo Bender was especially designed for quick and easy bending of long, straight sheet metal strips. PLUS model.
The Big and Long Brother! For a maximum bending height of 350 mm/14 in.
Offers the same features as the WUKO Duo Bender with the ability to produce hems
Locking by Rolling! Tool for closing the single-lock standing seam. Closes the profile in both directions.
The Little Different “Bead Roller”. Handy tool for beading, stiffening and offsetting of sheet metal.
The handy tool for quick and clean cutting. Equipped with ergonomic handle and handle rod to be easily and quickly extended on demand.
This double lock hand tool is used after the single lock is closed. Ideal for starting and ending or continuous double lock seaming.
Cordless corrugated nibbler up to 79 mm deep profiles.
Shear ideal for all installation shops, examples: cable trays, steel studs, coated cable trays, cable ladders, spiral tubing, mesh and wire.
Ideal for starting seam, for short façades and areas with difficult access or an entire roof or wall. No damage to coated or painted material. Easy to use.
A unique design for closing a single lock seam. This standard tool can be delivered in different lengths. No scratch marks to coated or painted material. Light in weight.
Freund 45° clinching/seaming pliers. Lap joint with precoated handles. Available in 3 jaw widths – 40mm, 60mm and 80mm
Freund Aviation Snips are constructed with special high quality steel, double compound leverage and are ideal for stainless steel sheets.
Freund straight clinching pliers eqquiped with precoated handles, lap joint and jaw widths of 40 mm, 60 mm and 80 mm.
These straight Freund Clinching Pliers come with a 80 mm jaw width, precoated handles and are available with either a staked or lap joint.
Freund corner clinching pliers with a jaw width of 60 mm and insertion depth of 66 mm. Equipped with precoated handles and a lap joint.
For straight and parallel incisions eg, square seam folding on wall connection edges, the notching length of 35 x 3 mm enables continuous…
Freund Small Clinching Pliers – 45° angled equipped with precoated handles, lap joint and a jaw width of 22 mm.
Freund Small Clinching Pliers – Straight equipped with precoated handles, lap joint and a jaw width of 22 mm.
This manually operated squareseamfolder joins SPM 30/80 profiles, smooth lead-on avoid marks at the transitions. It is easy to handle when working on…
Freund Tinman’s Hammer made of polydur with an angular design.
Freund Tinmen’s/Pelikan Snips made for stainless steel with a HRC 59 rating (blue).
Freund Tinmen’s/Pelikan Snips with PVC-coated handles, HRC 56 (green) for straight cutting
The Freund Twin Squareseam Folder 117 WDF allows simple and quick shaping of locking squareseam into double-seam in…
Use the Malco C5R Crimper to downsize stove pipe and round metal duct to create a male connection for joining sections.
Works well with HC1 and HC2 Hole Cutters. May be used to help cut take-off holes in sheet metal ductwork suspended below floor…
Improved max 200 snips fit any hand without sacrificing cut. Malco Max 2000 Aviation Snips now feature all-new, molded thermoplastic grips.
This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts, even circles and square…