The AV/PA version is predisposed for the mounting of a punching head for carrying out drilling, beading, nibbling, shutter slits, straight cuts and so on. There is also the option of activating the cutting or punching unit via the special reversing button.
The cutting capacity of variable angle notching machine is of 6 mm. thickness, and the cutting angle can be adjust from 30° to 140°.
Subject of a SIMASV® patent, the most important characteristic of the variable angle notching machine AV226/PA is the automatic adjustment of the slack between the blades from 1 to 6 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses.
The machine is equipped with hydraulic blade blockage.
|Workbench dimensions||950 x 800 mm|
|Blade length||220 mm|
|Angle adjustment||30 – 140°|
|Max. cutting thickness R42/mm²||6 mm|
|Max. cutting thickness R60/mm²||4.5 mm|
|Cycles per minute (for the total length of the blades)||40|
|Max. punching capacity||30 x 3.5|
|Max. punching capacity – Optional||40 x 2|
|Max. punching depth||350 mm|
|Goniometric squares with stop bar||2|
|Set of blades for iron at 15°||1|
|Set of blades for iron at 30°||1|
|Pair of mechanical hold-downs||optional|
|Mechanical hold-down for square||optional|
|Mechanical speed restrictor||optional|
|Notching machine dimensions – Width||950 mm|
|Notching machine dimensions – Depth||1000 mm|
|Notching machine dimensions – height||1260 mm|