Corner Notchers

Simasv AF258/P

Categories: , Tag:

The fixed angle notching machine AF258/P is prearranged for the mounting of the punch head.

The shearing head is mounted on rigid columns to prevent load oscillation of the head during the punching phase. However, during the notching phase the shearing head must be able to oscillate in the four directions to allow the auto-adjustment of the upper blades with respect to the lower ones. For this purpose two locking levers are set to the rear of the machine with the function of blocking or unblocking the head depending on whether the machine is punching or notching.

The auto-adjustment patented system between the upper and the lower blades allows simultaneous cutting of different thicknesses.

Simasv AF258/P
Workbench dimensions 700 x 900 mm
Blade length 250 mm
Max. cutting thickness R42/mm²  8 mm
Max. cutting thickness R60/mm²  5 mm
Cycles per minute (for the total length of the blades)  45
Max. punching capacity  30 x 3.5
Max. punching capacity – Optional  60 x 2
Max. punching depth  260 mm
Slotting head cutting capacity (max. L 60 x 60 x  6)  35 mm
Goniometric squares with stop bar  2
Set of blades for iron at 90°  1
Pair of mechanical hold-downs  1
Mechanical speed restrictor  optional/recommended
Notching machine dimensions – Width  700 mm
Notching machine dimensions – Depth  900 mm
Notching machine dimensions – height  1150 mm
Weight  980 kg
Smma-logo
+61 (03) 9758 9377 sales@sheetmetalmachinery.com.au