Product Categories : Ductworking : Spiro : Spiro Curvecutter Delta 1500

The machine is designed especially to cut out segments of highest accuracy from a blank. e.g. 1 elbow 200 mm with 4 segments is cutting in 1 path within 15 seconds. It has a micro processor, therefore no templates are required.
No burrs, no hardening of the edge, due to cutting with roller - shears.
Up to 9 different program settings from diameter 100-1500 mm. Simple input for all kinds of bends, flat oval bends, angle cuts and insulation fittings. An additional program makes it easy to recall pre-selected fittings by a simple code.
Accurate cutting of segments with high repeatability due to high-tech servo motors. No burrs, no hardening of the edge, due to cutting with 4 roller - shears. e.g. 1 elbow 200 mm with 4 segments is cutting in 1 path within 15 seconds.
- Select up to 9 different program settings ranging from 100 to 1500 mm diameter
- Simple input for circular or flat-oval bends, angle cuts and insulation fittings
- Accurate cutting of segments with high repeatability due to high-tech servo motors
- No burrs and no hardening of the edge as a result of cutting with 4 roller-shears
- Effi ciency: 1 elbow 200 mm with 4 segments is cutting in 1 path within 15 seconds
| Maximum Sheet Width: | 1500 mm (60") |
| Material Thickness: | Galvanised steel: 0.4 - 1.1 mm (0,016" - 0,043") Stainless steel: 0.4 - 0.6 mm (0,016" - 0,024") Aluminium: 0.5 - 1.1 mm (0,020" - 0,043") |
| Cutting Speed: | 2 - 10 m/min. (6 - 32 fpm) |
| Segment Angle: | 5 - 46 degrees (in steps of 1/10 degree) |
| Elbow Diametre: | 100 - 1500 mm (in steps of 1 mm) |
| Number of Cutters: | 1 - 4 (selectable on control panel) |
45/756 Burwood Highway
Ferntree Gully
Victoria 3156
AUSTRALIA
Tel: +61 (03) 9758 9377
Fax: +61 (03) 9752 3305