RAS Smart Cut

Many shears just cut metal. This is self-evident. When it comes to an efficient and profitable cutting process, they do not consider market needs. RAS Reinhardt Maschinenbau GmbH has analyzed the shearing process. The result is the SMARTcut swing beam shear: the perfect solution when quality parts and easy material handling are required.

With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all characteristics of a high performance, premium shear. The sheet support and sorting system leads the blanks to the backstop and sorts cut pieces to the front or the rear. When material thicknesses change, the blade clearance can be adjusted in seconds. The front and side beveled shear tables, the hardened squaring arm and the deep grip hollows simplify material handling for quick results. This is cutting efficiency at its best. The SMARTcut comes with two machine models. The highest comfort level is offered by a best value, fast and dynamic CNC-backstop.

Easy to operate and for lower budgets is the manual backstop, which can be positioned from the front. Both backstops offer a travel range of up to 750 mm. A foot lever determines, whether the part chute delivers the cut pieces to the front or the rear. This allows the operator to separate trim cuts or small parts from large parts without additional, later on sorting effort.With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all characteristics of a high performance, premium shear.

Standard equipment

• Parts chute for sorting cut pieces to the front and rear
• Sheet support system prevents hanging of thin materials under the backguage
• Parts collector in the front to catch pieces
• Extra wide and beveled left squaring arm 1000 mm and scale
• Three extra wide and beveled shear tables for quick and easy material handling
• Grip hollows bewteen the shear tables simplify the access for the operator
• Two extra wide and beveled table extensions 800 mm for optimum material support
• Hold down with plastic coating for gentle material clamping during the cut
• Single and continuous strokes, with 36 strokes per minute
• Very low rake angle (0.9 degress) for twist free cuts
• Quick blade clearance adjustment with basic eccentric and cutting gap eccentric
• Good visibility when cutting according to marks