DUCTWORKING MACHINERY

Seaming Without Limits! The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer is a 9-station high quality system. Both machines are designed for sheet thicknesses up to 1.5 mm mild steel. The profiles can be as high as 20 mm and the machines reach a speed of 16 m/min. The machines can have two sets of rolls set up at a time. This allows to have a set of Pittsburgh Rolls on one side and a set of Standing Seam Rolls on the other side. The same could be done with a set of Snap Lock Rolls on one side and Cam Standing Rolls on the other. The rolls are made from the highest quality case-hardened special steel. For additional safety the sheet support tables can be adjusted to the different run heights of the right and left roller set. Roller shafts, housed in axial and radial roller bearings, provide high-quality profiles. A wide gear box supports the roller shafts in the best possible way. The high-quality gear motor ensures smooth and quite running. It brings the drive power directly to rolls without transfer gears or belt drives in between. The wear resistant and hardened entrance guiding system is not in contact with the usually plasma-cut material edges. Graved run-in sheet support tables thus belong to the past. Blanks stiffened with Z-seams can be processed easily, as the material guiding system uses downhold pins in the squaring arm. An optional leveling unit allows to straighten seamed blanks or round them for radius cheeks.

Technical data				22.07		22.09
Rollforming Stations				7		9
Material Thickness max.		mm		1.5		1.5

For further information contact us on (03) 9758 9377 or email

RAS presents the first intelligent swaging system that actually "learns" as you swage and flange. Here's how the 12.35 brings you the most intelligent choice in swaging machines on the market today. It's easy! When you're ready to machine your first workpiece in a job, just press the "Auto-Teach" function. The 12.35's computer program memorizes when, and how, you set the upper wheel. Then, when you insert the second workpiece in the job sequence, the system automatically "clones" the entire operation. Your operator only has to lead the workpiece, and regulate its speed via the footswitch.

Technical data				12.35
Material Thickness max. (400 N/mm2)		mm		1.75
Center-To-Center distance		mm		63
Working depth max.		mm		255
Standard Equipment
Self learning AutoTeach Function		X
Flatsurfance panel and digital display		X
Two axis micro processor control		X
Variable speed drive with 2 speed ranges				0-14 m/min (up to 1.75 mm) 0-28 m/min (up to 1.25 mm)
Footswitch with smooth ramp accelerator		X
Right-Left-run switch		X
Divided and large hardened stop plate		mm		330 x 360
Horizontal positioning of the lower wheel		X
Upper wheel positioning with push buttons		X

For further information contact us on (03) 9758 9377 or email

Closes seams with widths of 10 mm and 13 mm on round tubes. Changeover from inside to outside seams in seconds. The working length can be doubled, by turning the tube.

Technical data						25.15
Working Length		mm				1520
Material Thickness max.		mm				1.0

For further information contact us on (03) 9758 9377 or email

              DUCTWORKING TOOLS AND MACHINERY

© Copyright 2004 - 2008 Sheetmetal Machinery Australia Pty Ltd